Website
26
Elysium
EL18
seconds". If it is set to "10 seconds" is set, the transmitter will play the
prompt when there are only 10 seconds left. If "Voice" is selected, it will
play "10-9-8-…3-2-1"
Persistent
It is used to set the current timing state of the timer, that is, the storage
state by the shutdown or model change. There are three types: "OFF",
"Flight", and "Manual Reset".
(To be updated...)
7.3.9 Timer2
Refer to 7.3.8 Timer 1 on how to setting and using.
7.3.10 Timer3
Refer to 7.3.8 Timer 1 on how to setting and using.
7.3.11 Preflight Checks
Display checklist
If a text file with the same name as the model is in the MODELS folder of the
SD card, the transmitter will recognize it as a model check list. If this option
is selected, the file will be displayed automatically.
Throttle State
When this item is selected, it will check whether the throttle is in the
lowest position upon power-on. If the throttle is not in the lowest position,
the system will give an alarm. If this item is not selected, the check is not
performed.
Custom Position
Turn on this function, you can customize the initial position of the throttle,
and the system will be detected at power on with this value as the
minimum throttle detection value.
Switch Position
It is used to set the initial position detection upon power-on. There are two
states: one is to be detected yellow background, and the other not to be
detected blue background. Players can define the position of the switch for
power-on detection as required.
Pots And Sliders
The knob and slider are used to set whether to detect VRA and VRB S1
represents VRA, and S2 represents VRB. There are three states: "OFF",
"AUTO", and "ON".
When "OFF" is selected, the positions of VRA and VRB are not detected
upon power-on.
When "AUTO" is selected, it works automatically.
When "ON" is selected, it detects whether the VRA and VRB are in the initial
