Website
39
Haptic
"Mode"
--"Quiet" All vibrations are off.
--"Alarm" Only the warning vibration is available.
--"Nokey" Disable the touch vibration only.
--"All" Enable all vibrations.
"Length" Set a single vibration feedback duration.
"Strength" Set the vibration strength.
Alarm
"Battery low" Set the low voltage alarm value. The range is 3.0v-12v.
"Inactivity" If the transmitter is not operated for a long period, the
system gives an alarm. The range is 0-250 minutes. When it is set to 0,
the alarm is disabled.
"Sound off" If the Sound off is selected, the alarm sound is disabled.
"Shutdown" Check whether the transmitter is connected to an aircraft
before the transmitter is powered off. The prerequisite is that the aircraft
is enabled with the transfer-back function to correctly transfer back the
RSSI.
Backlight
To set the backlignt parameters of the screen.
Power Off Delay
Set the time to wait for the transmitter to shut down after pressing and
holding the shutdown button on both sides. The range is 0-4s.
Country Code
It needs to match the geographic location to keep the radio frequency
transmission parameters to comply with the regulatory requirements.
Voice Language
Select the language for broadcasting. This list contains all supported
languages. Ensure that the voice package for the language is loaded
onto the SD card located in a subfolder of the SOUNDS directory.
Units
Select the metric or imperial unit for the telemetry value.
Play Delay(SW. mid pos)
Delayed broadcast range: -150 ms-850 ms.
