Website
42
Elysium
EL18
Inputs
"Calibration" You can calibrate the travel of the stick and
knob. After the transmitter is used for a period of time,
if there is drift or deviation of the stick or knob, you can
calibrate it by this function.Refer to the pictures below for
the steps of calibration.
"Sticks" To modify the default name of CH1-CH4, and
dead zone value of the stick. The maximum value is 128.
"Pots" To modify the default names of S1 VRA and S2
VRB, as well as the knob setup type.
"Switches" To modify the default name of each switch,
and set the switch types such as two-way switch, three-
way switch, and kickback switch.
Debug
(To be updated...)
7.4.8 Version
Display information about the current firmware version,
including firmware number, firmware update time,
supported wireless protocols, etc.
