Flux F 570, Перевод оригинальной инструкции по эксплуатации

Страница: 124 / 212

Maintenance and servicing
Operating instructions VISCOPOWER
121
E
N
G
L
IS
H
WARNING
Running shaft and running rotor
Risk of cutting and injury from the running shaft and rotor.

Do not reach into the suction opening or the discharge connection of the
progressive cavity pump!
WARNING
Free-running drive shaft
Risk of drawing in and injury due to free-running drive shaft of the motor.

Do not operate the motor without the progressive cavity pump!

Only switch on the machine if it has been properly installed in the peripherals.
WARNING
Unpredictable start-up of the motor
Risk of injury due to medium spraying out.

Secure the motor against unintentional start-up.

Use eye protection.

The following personal protective equipment must be used:
o
Hand protection
o
Protective footwear
o
Eye protection (depending on the pumped medium)
o
Hearing protection (depending on emission sound pressure)
o
Respiratory protection (depending on the pumped medium)

Servicing and maintenance of the machine may only be carried out by qualified and
authorised maintenance personnel.

Before any maintenance, inspection and repairs, the machine must be taken out of
operation.

Maintenance and repair sometimes require that protective equipment be put out of
operation or dismantled. After completion of maintenance and servicing, protective
equipment must be immediately reinstalled and checked for proper function.

Maintenance and servicing may only be carried out if the machine is at a standstill.

Unsuitable operating and auxiliary substances can damage the machine. Only the
specified operating and auxiliary substances may be used.

Do not mix operating and auxiliary substances of different types and manufacturers.
Only use the container approved and labelled for the respective operating substance.

After maintenance and repair, retighten any loosened screw connections.

Immediately replace any damaged machine parts with original parts.