Fluke Versiv, Руководство пользователя

Страница: 147 / 260

Chapter 6: Certify Fiber Cabling
Autotest in Loopback Mode
133
To see the results, limits, and margins for the fiber, tap the
window.
 The settings the tester used for the test.
 The dashed lines are around the connectors and fiber that are
included in the loss and length results. Gray connectors and
fibers are not included because you used them to set the
reference.
 Connector icons show the number you entered for the
TOTAL
CONNECTIONS
setting on the
No. of Connectors/Splices
screen (Figure 44 on page 114). For Figure 51, the
TOTAL
CONNECTIONS
setting is 3.
 The round icon shows the number of splices entered for the
SPLICES
setting on the
No. of Connectors/Splices
screen.

To see help for the screen, tap .
 When more than one button shows at the bottom of the screen,
the tester highlights one in yellow to recommend which one to
tap. See “Buttons to Do Tests and Save Results” on page 17.