Fluke Versiv, Руководство пользователя

Страница: 175 / 260

Chapter 7: Use the OTDR
How to Do an OTDR Test
161
How to Do an OTDR Test
Figure 61 shows the equipment for OTDR tests.
To do an OTDR test
1
Make sure that the home screen shows the correct settings for
the job. If it is not necessary to use specific settings, set the
test type to
Auto OTDR
to make sure the results show all of
the events on the fiber.
2
Clean and inspect the connectors on the launch and tail cords
and the fiber to be tested.
3
Connect the tester to the link as shown in Figure 62, 63, or 64.
4
Tap
TEST
or press

.
Note
The tester shows a warning if there is an optical
signal on the fiber.
Figure 61. Equipment for OTDR Tests
GPU31.EPS

Versiv unit with OTDR module
installed
 Launch and tail cords (match the
fiber to be tested)

FI-1000 video probe with USB
connector
 Fiber cleaning supplies
 AC adapter with line cord
(optional)
A
B
C
E
D