Fluke Versiv, Руководство пользователя

Страница: 127 / 260

Chapter 6: Certify Fiber Cabling
Settings for Fiber Tests
113
No. of
Connectors/
Splices
The
Total Connections
and
Splices
settings are applicable
only if the selected test limit uses a calculated limit for loss.
Total Connections
: Enter the total number of
connections that are in each path of the link. Do not
adjust the number for the
Reference Method
you use.
For example, if the link has 3 connections, enter “3” even
if you use the
2
or
3 Jumper
reference method. When
the tester calculates the loss limit, it automatically
removes the losses of the connections you used to set the
reference.
Note
The CertiFiber Pro automatically adjusts the
number of connections for the Reference
Method you use. This is different from the DTX
CableAnalyzer, where you do not include the
reference connections in the number of
connectors.
Splices
: Enter the number of splices in each path of the
link.
Jumper Reference
: Enter the number of jumpers you will
use in each fiber path when you set the reference. The
dotted lines in the diagram on the screen show you
which parts of the link are included in the test results.
See
Reference Method
above.
Figure 44 shows the
No. of Connectors/Splices
screen.
Figure 45 shows how to count the jumpers, connectors,
and splices for this setting.
TRC LENGTH
(Test reference
cord length)
You can enter length of your test reference cords when you
set the reference. To enter this value, tap
TRC LENGTH
on
the
SET REFERENCE
screen. The length you enter does not
change the test results. The tester saves the length with the
results to meet TIA reporting requirements.
Table 6. Settings for Fiber Tests (continued)