Fluke Versiv, Руководство пользователя

Страница: 125 / 260

Chapter 6: Certify Fiber Cabling
Settings for Fiber Tests
111
3
On the
TEST SETUP
screen, tap the panels to change settings
for the test. See Table 6.
4
On the
TEST SETUP
screen, tap
SAVE
when your test setup is
completed.
5
On the
CHANGE TEST
screen, make sure the button next to
the test is selected, then tap
USE SELECTED
.
Table 6. Settings for Fiber Tests
Setting Description
Module
Select the CertiFiber Pro module you will use.
Test Type
Use
Smart Remote
mode for tests on duplex-fiber
cabling. See page 118.
Use
Loopback
mode for tests on patch cords and cable
spools. See page 126.
Use
Far End Source
mode for tests on individual fibers.
See page 134.
Bi-Directional Off
: The tester does fiber tests in only one direction.
On
: The tester does fiber tests in both directions. See “Bi-
Directional Tests” on page 143.
The
Bi-Directional
setting is not available for
Far End
Source
mode.
Fiber Type
Select a fiber type that is correct for the type you will
test. To see a different group of fiber types, tap
MORE
,
then tap a group. To make a custom fiber type, tap
Custom
in the
Fiber Groups
list. See the Technical
Reference Handbook.
Fiber Type
Settings IOR
: The tester uses the index of refraction to calculate
the optical length of the fiber. Each fiber type includes
the value specified by the manufacturer. To use a
different
IOR
, make a custom fiber type. See the
Technical Reference Handbook.
-continued-