Fluke Versiv, Руководство пользователя

Страница: 240 / 260

Versiv Cabling Certification Product Family
Users Manual
226
Change the Network Settings
It is not usually necessary to change the wired or Wi-Fi network
settings before you try to make a connection. But for example if
you must use static addressing, you can get to the settings on the
NETWORK
screen.
To get to the network settings
On the home screen, tap
TOOLS
, then tap
Network
, then tap the
Wired
or
Wi-Fi panel
.
To test the settings
Tap
CONNECT
on the
WI-FI PORT
or
WIRED PORT
screen.
Settings for the Wired Port
The tester can use
DHCP
(dynamic host configuration protocol) or
Static
for the address method. Most networks use
DHCP
.
For
Static
, enter an IP address for the tester and the
Subnet Mask
,
Gateway
address, and
DNS1
and
DNS2
addresses for the network.
If you are not sure what to enter, speak to the network
administrator.
Settings for the Wi-Fi Port
Table 8 shows the Wi-Fi settings.
Sign Your Tester Out of LinkWare Live
1
On the home screen, tap the
TOOLS
icon, then tap
Sign In
.
2
On the
SIGN IN
screen, tap
SIGN OUT
.
Or, turn off the tester.