manualshive.com logo in svg

Fluke ScopeMeter 19 B Series, Руководство по обслуживанию

Поделиться
Скачать
Fluke ScopeMeter 19 B Series Скачать руководство пользователя страница 22

Fluke 19xB-19xC-2x5C 

Service Manual 

3-8 

3.5 Accessories 

Table 3-3. Standard Accessories 

Item Ordering 

Code 

Battery Charger, available models: 
 

Universal Europe 230 V, 50 and 60 Hz 

 

North America 120 V, 50 and 60 Hz 

 

United Kingdom 240 V, 50 and 60 Hz 

 

Japan 100 V, 50 and 60 Hz 

 

Australia 240 V, 50 and 60 Hz 

 

Universal 115 V/230 V, 50 and 60 Hz

 

 

The universal adapter is standard equipped with a plug EN60320-2.2G.  For 
connection to the mains outlet use a line plug that complies with National 
Standards.  The 230V rating of the BC190/808 is not for use in North America.  

 

 
BC190/801 
BC190/813 
BC190/804 
BC190/806 
BC190/807 
BC190/808 

Voltage Probe Set (Red), designed for use with the Fluke ScopeMeter 190 series 
test tool.  The set includes the following items (not available separately):  

•

  10:1 Voltage Probe (red) 

•

  4-mm Test Probe for Probe Tip (red) 

•

  Hook Clip for Probe Tip (red) 

•

  Ground Lead with Hook Clip (red) 

•

  Ground Lead with Mini Alligator Clip (black) 

•

  Ground Spring for Probe Tip (black) 

VP210-R 

See Note below 

Voltage Probe Set (Gray), designed for use with the Fluke ScopeMeter 190 series 
test tool.  The set includes the following items (not available separately): 

•

  10:1 Voltage Probe (gray) 

•

  4-mm Test Probe for Probe Tip (gray) 

•

  Hook Clip for Probe Tip (gray) 

•

  Ground Lead with Hook Clip (gray)  

•

  Ground Lead with Mini Alligator Clip (black) 

VP210-G 

See Note below

 

Test Lead Set  

TL75 

Accessory Set (Red) 
The set includes the following items (not available separately): 

•

  Industrial Alligator for Probe Tip (red) 

•

  2-mm Test Probefor Probe Tip (red) 

•

  Industrial Alligator for Banana Jack (red) 

•

  2-mm Test Probe for Banana Jack (red) 

•

  Ground Lead with 4-mm Banana Jack (black) 

AS200-R 

Accessory Set (Gray) 
The set includes the following items (not available separately): 

•

  Industrial Alligator for Probe Tip (gray) 

•

  2-mm Test Probe for Probe Tip (gray) 

•

  Industrial Alligator for Banana Jack (gray) 

•

  2-mm Test Probe for Banana Jack (gray) 

•

  Ground Lead with 4-mm Banana Jack (black) 

AS200-G 

Replacement Set for Voltage Probe VP200 
The set includes the following items (not available separately): 

•

  2x , 4-mm Test Probe for Probe Tip (red and gray) 

•

  3x , Hook Clip for Probe Tip (2 red, 1 gray) 

•

  2x , Ground Lead with Hook Clip (red and gray) 

•

  2x , Ground Lead with Mini Alligator Clip (black) 

•

  5x Ground Spring for Probe Tip (black) 

RS200 

Содержание ScopeMeter 19 B Series























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды