Fluke 5820A, Руководство по обслуживанию

Страница: 24 / 158

5820A
Service Manual
1-12
1-13. Wave Generator Specifications
Table 1-7. Wave Generator Specifications
Wave Generator
Characteristics
Square Wave and Sine Wave
into 50
Ω
or 1 M
Ω
Triangle Wave
into 50
Ω
or 1 M
Ω
Amplitude
Range into 1 M
Ω
: 1.8 mV to 55 V p-p
into 50
Ω
: 1.8 mV to 2.5 V p-p
into 1 M
Ω
: 1.8 mV to 55 V p-p
into 50
Ω
: 1.8 mV to 2.5 V p-p
1-Year Absolute Uncertainty,
tcal
±
5
°
C, 10 Hz to 10 kHz
±
(3 % of p-p 100 µV)
±
(3 % of p-p 100 µV)
Sequence 1-2-5 (e.g., 10 mV, 20 mV, 50 mV) 1-2-5 (e.g., 10 mV, 20 mV, 50 mV)
Typical DC Offset Range 0 to
±
(
≥
40 % of p-p amplitude) [1] 0 to
±
(
≥
40 % of p-p amplitude) [1]
Ramp Linearity [2] better than 0.1 % 10 Hz to 10 kHz
[3]
Frequency
Range 0.01 Hz to 100 kHz 0.01 Hz to 100 kHz
Resolution 4 or 5 digits depending upon
frequency 4 or 5 digits depending upon
frequency
1-Year Absolute Uncertainty,
tcal
±
5
°
C [5]
±
(2.5 ppm + 5
µ
Hz) [4]
±
(2.5 ppm + 5
µ
Hz) [4]
[1] The DC offset plus the wave signal must not exceed 30 V rms.
[2] Applies to the 10 % to 90 % of the triangle waveform 500 mV p-p to 10 V p-p.
[3] No specification below 10 Hz or above 10 kHz.
[4] With 10 MHz external reference selected, the uncertainty becomes that of the external clock plus 5 µHz.
[5] Uncertainties below 10 Hz are typical.
[6] Square wave rise/fall time typically less than 500 ns.