manualshive.com logo in svg

Fluke 5820A, Руководство по обслуживанию

Поделиться
Скачать
Fluke 5820A Скачать руководство пользователя страница 16

5820A
Service Manual

1-4

•

 

External reference.

•

 

Auxiliary input.

•

 

5-channel output (5-Channel Option). The 5-Channel Option allows you to calibrate
up to five oscilloscope channels simultaneously without changing cables.

•

 

Simultaneous output of a signal and a trigger signal.

•

 

600 MHz, Leveled Sine wave output.

•

 

Optional 600 MHz - 2.1 GHz, Leveled Sine wave output with 150 ps fast edge.

•

 

Standard IEEE-488 (GPIB) interface, complying with ANSI/IEEE Standards
488.1-1987 and 488.2-1987.

•

 

EIA Standard RS-232-C serial data interface for printing, displaying, or transferring
internally stored calibration constants, and for remote control of the 5820A.

•

 

Pass-through RS-232-C serial data interface for communicating with the Unit Under
Test (UUT).

•

 

Extensive automatic internal self testing and diagnostics of analog and digital
functions.

1-2.  How to Contact Fluke

USA and Canada:  1-888-99-FLUKE (1-888-993-5853)
Europe:  +31 402-675-200
Japan:  +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world:  +1-425-446-5500

For additional information about Fluke, its products, and services, visit Fluke’s web site
at: 

www.fluke.com

1-3.  Instruction Manuals

 

The 5820A Manual Set provides complete information for operators and service or
maintenance technicians. The set includes:

•

 

5820A Operators Manual (PN 802154)

•

 

5820A Service Manual (PN 673142)

 

The 5820A Operators Manual ships with the instrument. The 5820A Service Manual is
optional. Order additional copies of the manuals separately using the part number
provided. For ordering instructions, refer to the Fluke Catalog, or ask a Fluke sales
representative. These manuals are also available on Fluke's web site 

www.fluke.com.

1-4. 

5820A Operators Manual

 

The 5820A Operators Manual provides complete information for installing the 5820A
Oscilloscope Calibrator and operating it from the front panel keys and in remote
configurations. The manual also provides a glossary of calibration, specifications, and
error code information. The 5820A Operators Manual includes the following topics:

•

 

Installation

•

 

Operating controls and features, including front panel operation

•

 

Remote operation (IEEE-488 bus or serial port remote control)

Содержание 5820A































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды