Fluke 5790A, Руководство оператора

Страница: 143 / 220

Remote Commands
Alphabetical List of 5790A Device-Dependent Commands
6
6-37
Note
The "TERM" or "COMP" parameter sets the responses in serial remote
control to be appropriate for interactive terminal use or operation under
program control. Specifying "TERM" generates remote responses in plain
English for a human operator using a terminal. Specifying "COMP"
generates remote responses for computer program use. (This command has
the same effect as setting Remote I/F to "TERMINAL" or "COMPUTER" in
the RS-232-C Port Setup Menu.)
Defaults:
9600,TERM,XON,DBIT8,SBIT1,PNONE,CRLF
Example
1200,COMP,XON,DBIT8,SBIT1,EVEN,CRLF
SP_SET?
Returns the serial port settings contained in nonvolatile memory.
Response
1. (Integer) One of these baud rate values: 300, 600, 1200, 2400, 4800, 9600, 19200, or
38400
2. (CRD) TERM or COMP (Response type)
3. (CRD) XON, RTS, or NOSTALL (Stall method)
4. (CRD) DBIT7 or DBIT8 (Data bits)
5. (CRD) SBIT1 or SBIT2 (Stop bits)
6. (CRD) PNONE, EVEN, ODD, or IGNORE (Parity)
7. (CRD) CR, LF, or CRLF (End-Of-Line)
Example
9600,TERM,XON,DBIT8,SBIT1,PNONE,CRLF
SRQSTR
Sets the serial remote mode SRQ (Service Request) response string (up to 40 characters).
Parameter
The serial remote mode SRQ string.
Example
SRQSTR "\nSRQ\n
"
Note
"\n" denotes the NEWLINE character (hex 0A).
SRQSTR?
Returns the string programmed for Serial Mode SRQ responses.