Fluke 5790A, Руководство оператора

Страница: 133 / 220

Remote Commands
Alphabetical List of 5790A Device-Dependent Commands
6
6-27
Response
(CRD) HALT, ABORT, or CONT (see the DIAGFLT command for meanings)
DUNIT
Sets the delta unit value. (Also see the DELTA? command.) The default is PPM.
(Nonvolatile.)
Parameter
PPM, PCT, V, or RATIO
DUNIT?
Returns the currently programmed delta units.
Parameters
None
Response
(CRD) PPM, PCT, V, or RATIO
EOFSTR
Sets the End-Of-File character string. The maximum length is two characters. The EOF
setting is saved when the power is turned off. (Nonvolatile overlapped command.)
Parameters
The EOF string (two characters maximum)
EOFSTR?
Returns the End-Of-File character string
Parameter
None
Response
(String) The End-Of-File character string
ERR?
Returns the first error code contained in the 5790A error queue, then removes that error
code from the queue. Sent following the error code is an explanation of the error code,
similar to but not always the same as the string you receive from the EXPLAIN?
command. The explanation sent in response to this query can contain variables specific to
a particular error event. (To get just the error number use FAULT?)
A zero value is returned when the error queue is empty, so to read the entire contents of
the error queue, repeat ERR? until the response is:
"0,"No Error"
Parameter
None