Fluke 5790A, Руководство оператора

Страница: 118 / 220

5790A
Operators Manual
6-12
Parameter
None
Example
If you send the compound command "*RST;*OPC?", the *OPC? is not waiting for *RST
to complete, it is waiting for the next measurement to complete.
*SAV
Save the current 5790A operating state in memory for later use with the *RCL command.
This command together with *RCL gives you up to 16 operating state memories. Once an
operating state is saved, it is nonvolatile unless an EEPROM format is done.
Parameter
An integer 0 through 15, for one of the 16 operating state memory locations
*SRE
Loads a byte into the Service Request Enable register (SRE), described under
"Checking 5790A Status."
Parameter
The decimal equivalent of the binary number to load into the register. You can also send
a binary, octal, or hexadecimal number if you precede the number with #b, #o, or #h,
respectively. (A number without a preceding designator is taken as decimal.)
Example
*SRE 56
Enables bits 3 (EAV), 4 (MAV), and 5 (ESB) in the Service Request Enable register.
*SRE?
Returns the byte from the Service Request Enable register, described under "Checking
5790A Status."
Parameter
None
Response
(Integer) The contents of the Instrument Status Register in decimal.
*STB?
Returns the status byte. The status byte is described under "Status Information."
Parameter
None
Response
(Integer) Decimal equivalent of the status byte.