Fluke 5522A Operators, Руководство оператора

Страница: 107 / 426

Front Panel Operation
How to Set Output
4
4-31
123.456 mV (below).
nn084f.eps
Note
The AUX output is limited to 3.3 V rms for sine waves, 6.6 V p-p for square
waves, 9.3 V p-p for triangle and truncated sine waves.
8. Press the numeric keys and decimal point key to enter the desired voltage output at
the AUX terminals (maximum six numeric keys). For example, 234.567.
9. Press a multiplier key, if necessary. For example, press
c
.
10. Press
V
.
11. The Control Display now shows the amplitude of your entries for the NORMAL
terminals (upper reading) and AUX terminals (lower reading) (below is typical).
nn092f.eps
12. Press the numeric keys and decimal point key to enter the desired frequency output
(maximum five numeric keys). Press a multiplier key, if necessary. For example,
press the kilo multiplier key
K
. Then press the
H
key. For example,
1.1234 kHz.
13. The Control Display now shows your voltage and frequency entries. For example,
123.456 mV and 234.567 mV at 1.1234 kHz (below).
nn093f.eps
14. Press
E
. The calibrator clears your entry from the Control Display and copies it
into the Output Display (below is typical).
nn094f.eps
15. Press
O
to activate the calibrator output.
Two softkey labels appear on the Control Display: V@NOR/V@AUX and WAVE
MENUS.