DYNAVERT
®
L05
Instruction manual
4BS0516DE-EN/011
Stand/ issue: 25.07.03
21
3.5 Operation
General instructions for the handling:
•
Select menu: press key
(information) or
(parameter) (get in with “Enter”).
•
Select submenu or parameter: press key
or
(get in with “Enter”).
•
Accept submenu or parameter for input: press key
(Enter).
•
Release parameter for the modification: press key
(-> the display shows a black bar).
•
Change the parameter value: press key
(up) or
(down).
•
Accept the new parameter value: press key
.
Example:
Sequence of key operation for the change of the rated speed
v 3
- press key
- press key
until menu
P-TRAVEL CURVE DATA
appears
- press key
- press key
until
v 3
appears
- press key
- press key
or
until the desired value appears on the display
- press key
to accept the value
After change of parameters:
- press key
to return to the parameter menu
- press key
to get into the status menu (exit from parameterizing level)
- press key
to get into the information menu (exit from parameterizing level)
Note- Fault accknowledgement:
•
Reset fault signal memory: press keys
and
(RESET)
simultaneously.
v-travel = 2,5 m/s
BrDis(S) = 400,0cm
Information menu
Status menu => autom. change of language after pressing key >3 sec
(savings
with
parameter
P-OPERATION : Language
)
Parameter menu
