Flavor Burst TS 80BLD, Руководство пользователя

Страница: 54 / 96

53
Assembling the Blending Assembly
1. Place the Gear Cartridge into the Drive
Assembly Gear Box so that the gear teeth
line up with the gear inside the Gear Box.
26023
2. Install the Blending Head onto the Gear Box
and rotate off-center to secure.
26024
3. Insert the Drive Motor into the Gear Box so
that all four locking screws are fully seated.
Rotate the motor clockwise to secure.
26025
Installing the Spout Adapter
Every TS 80BLD system ships with two
common spout adapters. The ADPT 8750TA
Adapter fits most Taylor Crown Series freezers.
It has two tabs which allow the operator to
remove the adapter from the spout more easily.
The ADPT 101A standard Adapter fits most
other freezers and has no tabs.
Additional adapters are available from your
local distributor for use with other models and
freezer manufacturers. See the ALTERNATE
PARTS AND KITS BY FREEZER MODEL
section for more information.
These two
adapters are designed to install on the spout
with the freezer door installed on the freezer.
Always keep extra o-rings in the Spare Parts Kit
as they are wear items.
1. Ensure the freezer door spout is clean and
sanitized. Ensure the Spout Adapter and
o-ring has also been cleaned and sanitized.
2. Install the o-ring on the Spout Adapter, in
the groove along the bottom. If your
adapter has an internal o-ring and gasket,
ensure they are installed in their proper
positions.
26135
3. Snap the adapter onto the freezer spout.
Push up on the adapter with your palm to
ensure it is evenly and fully installed.
26138