Flavor Burst TS 80BLD, Руководство пользователя

Страница: 27 / 96

26
NOTE:
YOUR HANDS SHOULD BE CLEANED
AND SANITIZED BEFORE YOU PERFORM
THE FOLLOWING PROCEDURES.
NOTE:
THE FOLLOWING PROCEDURES
REQUIRE APPROVED, SERVICEABLE AND
SANITIZED TOOLS AND BRUSHES.
CONTACT YOUR LOCAL DISTRIBUTOR FOR
RECOMMENDED SUPPLIES.
NOTE:
USE AN APPROVED CLEANER AND
SANITIZER FOR THE FOLLOWING
PROCEDURES. REFER TO
MANUFACTURER’S INSTRUCTIONS FOR
PROPER PREPARATIONS OF THESE
CLEANING AGENTS.
NOTE:
INSPECT ALL WEAR ITEMS AND
REPLACE IF NECESSARY.
Removing the Blending System
Follow these instructions to remove the
Blending System from the freezer.
1. With a container under the dispensing
spout, press the INJECTOR FLUSH key on
the Touchscreen to purge any remaining
product from the Blending Head.
Injector Flush
26250
2. Rotate the 9-Tube Assembly coupler until it
unlocks and is able to slide out of the
Blending Head syrup line opening.
26050
3. Disconnect the Drive Motor cable from the
Drive Motor.
26049
4. Rotate the Blending Head locking collar until
it unlocks from the Spout Adapter and
remove the Blending Head from the
Adapter.
26051
5. Lift the Suspension Bracket with the
Blending Assembly from the freezer door
knob.
26052
6. Remove the Spout Adapter by pulling down
on the tab.
26137
DAILY CLOSING PROCEDURES