Flavor Burst TS 80BLD, Руководство пользователя

Страница: 34 / 96

33
22. Once the flush process has completed the
full 15 minute flush, press the BACK key to
return to the Water / Syrup Flush menu
screen. Disconnect the Pump Flush
Adapter. Return the Pump Flush Adapter to
its place in the cabinet.
26273
23. Clean the exposed surfaces of the Syrup
Bag Connector and bag fitment with
detergent water, single service towel and
brush if necessary. Then rinse and dry the
Connector and fitment using clean water
and single service towels.
Detergent
CLEAN
Water
RINSE
DRY
26276
24. Using a spray bottle of approved sanitizer
solution, spray the syrup bag fitment and
the Syrup Bag Connector. Allow these
parts to sanitize for at least 1 minute.
26271
25. If the newly installed bag has the direct
connect nozzle fitment, skip to Step 28. If
you have a wide bag fitment that requires a
lock and bag adapter, proceed to the next
step.
26. Attach the cleaned Syrup Bag Adapter to
the bag fitment. The notch of the black
collar must settle into one of the grooves on
the fitment in order to secure the
connection.
NOTCH MUST
SETTLE INTO
GROOVE
26077
27. Slide a syrup bag lock over the adapter and
bag fitment.
26057
NOTE:
THE ADAPTER VALVE CAN BE
TURNED IN ANY POSITION SO THAT THE
SYRUP TUBES ARE NOT PINCHED.
28. Connect the Syrup Bag Connector to the
Syrup Bag Adapter.
26275