Flavor Burst TS 80BLD, Руководство пользователя

Страница: 67 / 96

66
4. Hold a container under the spout to catch
flavor product. Pull the draw handle down
to dispense product. Ensure the TS 80BLD
operates properly with all 8 syrup lines
dispensing in succession.
26211
NOTE:
IF THE SYSTEM SOUNDS A BEEP
AND FLAVORS CEASE TO FLOW, THE
SYSTEM MAY BE SET TO TIMED SERVING
SIZE DRAW MODE. CHANGE THE SYSTEM
TO STANDARD MANUAL DRAW MODE
ACCORDING TO INSTRUCTIONS IN THE
SECTION “SETTING THE STANDARD
MANUAL DRAW MODE” AND THEN REPEAT
THIS SECTION.
5. If a syrup line fails to operate when tested,
select that flavor on the Touchscreen and
draw the serving again to verify the syrup
pump is malfunctioning. See TROUBLE-
SHOOTING GUIDE section or contact your
local distributor for help.
Chocolate Swirl
Strawberry
Butter Pecan
Classic Cherry
Banana Ripple
Green Apple
Blue Goo
Purple Grape
Injector Flush
Setup
26521
Draw Mode Options
The TS 80BLD system can be set for two
different draw modes.
The standard manual draw mode dispenses
flavors as long as the draw handle is open.
Flavor flows through the syrup line when the
draw handle is in the open (dispensing)
position. The flavor continues to flow until the
draw handle is closed. In this mode, the
operator can clear out the remaining flavors in
the spout and reduce carryover in the next
serving by topping off the serving (quickly
opening and closing the spout over the serving)
or dispensing a small amount of plain product
into a cup to dispose of later.
The timed serving size draw
mode eliminates
the need for topping off the serving. Small,
medium, large and extra-large sizes are pre-
programmed to stop the flow of flavor after
product has dispensed for a specific time.
When the serving has reached its size limit,
flavor flow ceases and, shortly after, a beeping
sound alerts the operator to close the draw
handle. The brief time between the flavor shut-
off and the beeping sound allows unflavored
product to clear the remaining flavor through
the Blending Head, which greatly reduces
carryover issues. This application is also
useful for self-service operations in maintaining
consistent serving sizes from customer to
customer.
The auto dispense draw mode is exclusively for
Frozen Carbonated Beverage freezers and will
not work on a soft serve freezer.