I n s t a l l a t i o n a n d S e t u p
13
Model 1010 Ion Mill
Standard Magnification Version
2.
Insert the microscope post through the cutout on top of the enclosure, into the
threaded hole
3.
Rotate the microscope post clockwise until tight
4.
Assemble the stereo microscope. Install the 10X eyepieces after removing their
individual lens caps, and then remove the lens cap on the microscope’s lens
5.
Install the microscope onto its post, lowering its mount until it contacts the spacer
High magnification microscope installed
Process Control Computer
The process control computer is shipped already installed. The connections to the rear of
the computer should be checked before operation.
Coarse and fine
focus knobs
Height adjustment
Process control
computer
Sample chamber
