M a i n t e n a n c e
37
Model 1010 Ion Mill
Standard Magnification Version
2.
Remove the top light assembly (See
page 34
.)
3.
To remove the light bulb from the light assembly, rotate the black plastic cap
located on the rear of the light assembly counterclockwise. The light bulb will
drop out of the assembly. Because the lamp is a halogen bulb, care should be
taken not to touch the glass bulb surface. Any oil or other contamination will
diminish the life of the bulb. Should inadvertent contact with the bulb occur, it
must be wiped with methanol and a lint free tissue.
4.
Place the new light bulb into the housing and thread on the screw cap. Install the
light housing into the chamber and replace the "L" clamp
Bottom Light
1.
Ensure the instrument is vented and not powered ON
2.
To replace the light bulb, unscrew the black plastic cap until it becomes free from
the assembly at which point the bulb will drop out. Because the lamp is a
halogen bulb, care should be taken not to touch the glass bulb surface. Any oil or
other contamination will diminish the life of the bulb. Should inadvertent contact
with the bulb occur, it must be wiped with methanol and a lint free tissue. Place
the new light bulb into the housing and thread on the screw cap.
Black plastic cap
Top light bulb
assembly
Black plastic cap
