57
Windshield Defrosting And Defogging
Set the mode selector knob to the
posi
-
tion and turn the blower control knob to the
desired speed.
In this position, the outside air position is
automatically selected, and when the blower
control knob is on, the air conditioner auto
-
matically turns on. The air conditioner will
directly dehumidify the air to the front wind
-
shield and side windows. Air flow amount
will be increased.
Use the temperature control knob to increase
the air flow temperature and defog the wind
-
shield more quickly.
Sunlight/Temperature Sensor
The air conditioning system measures inside
and outside temperatures, and sunlight.
It then sets temperatures inside the cabin
accordingly.
Sunlight Sensor
Interior Temperature Sensor
NOTE:
Do not obstruct either sensor. Otherwise, the
air-conditioning system will not operate
properly.
POWER WINDOWS
Power Window Controls
The ignition must be in the ON position for
the power windows to operate.
A power window may no longer open/close if
you continue to push the switch after
opening/closing the power window.
If the power window does not open/close,
wait a moment and then operate the switch
again.
NOTE:
To prevent burning out the fuse and
damaging the power window system, do not
open or close both windows at once.
The passenger window can be operated with
each door switch when the power window
lock switch on the driver's door is in the
unlocked position.
WARNING!
Set the temperature control to the hot or
warm position when defogging (Front
Defrost position). Using the Front Defrost
position with the temperature control set
to the cold position is dangerous as it will
cause the outside of the windshield to fog
up. Your vision will be hampered, which
could lead to a serious accident.
