IN CASE OF EMERGENCY
202
4. Disconnect the connector from the unit
by pressing the tab on the connector with
your finger and pulling the connector
rearward.
5. Turn the socket and bulb assembly coun
-
terclockwise and remove it.
Front Direction Indicator Housing
6. Disconnect the bulb from the socket.
Abarth Direction Indicator Lamp Connector
Direction Indicator Lamp Connector
7. Install the new bulb in the reverse order
of the removal procedure.
Fog Lights
Proceed as follows:
1. If you are changing the right bulb, start
the engine, turn the steering wheel all
the way to the right, and turn off engine.
If you are changing the left bulb, turn the
steering wheel to the left.
2. Make sure the ignition is switched off,
and the headlight switch is off.
3. Remove the fasteners in the five loca
-
tions and partially peel back the mud
guard.
4. Disconnect the connector from the unit
by pressing the tab on the connector with
your finger and pulling the connector.
5. Turn the socket and bulb assembly coun
-
terclockwise, extract the bulb and
remove it.
6. Disconnect the bulb from the socket.
7. Install the new bulb in the reverse order
of the removal procedure.
1 — Socket Assembly
2 — Bulb