17
No Key Fob Touching The Key Fob
If the engine cannot be started due to a
discharged key fob battery, the engine can
be started using the following procedure:
1. Continue to depress the brake pedal
firmly until the engine has completely
started.
2.
Manual Transmission
: Continue to
depress the clutch pedal firmly until the
engine has completely started.
3. Verify that the keyless ignition start indi
-
cator light (green) flashes.
4. Touch the START/STOP ignition button
using the backside of the key fob while
the keyless ignition start indicator light
(green) flashes.
5. Verify that the keyless ignition start indi
-
cator light (green) turns on.
6. Push the START/STOP ignition button to
start the engine.
Discharged Key Fob Battery Start Procedure
When touching the START/STOP ignition
button using the backside of the key fob,
touch the START/STOP ignition button with
the key fob buttons facing up.
The engine cannot be started unless the
clutch pedal is fully depressed (manual
transmission) or the brake pedal is fully
depressed (automatic transmission).
If there is a malfunction with the START/
STOP ignition button function, the keyless
ignition start indicator light (amber) flashes.
In this case, the engine may start. However,
contact an authorized dealer as soon as
possible.
If the keyless ignition start indicator light
(green) does not illuminate, perform the
operation from the beginning. If it does not
illuminate, contact an authorized dealer.
To change the ignition position without
starting the engine, perform the following
operations after the keyless ignition start
indicator light (green) turns on:
1. Release the clutch pedal (manual trans
-
mission) or brake pedal (automatic trans
-
mission).
2. Push the START/STOP ignition button to
change the ignition position. The ignition
cycles in the order of ACC, ON, and OFF
each time the START/STOP ignition
button is pushed.
NOTE:
To change the ignition position again,
perform the operation from the beginning.