GETTING TO KNOW YOUR INSTRUM
ENT PANEL
110
NOTE:
Because the key fob uses low-intensity radio
waves, the warning may activate if the key
fob is carried together with a metal object or
it is placed in a poor signal reception area.
Request Switch Inoperable Warning Beep — If
Equipped With Advanced Keyless Function
If the request switch on the exterior door
handle is pushed with a door open, or the
ignition has not been placed in the OFF posi
-
tion, a beep will be heard for about two
seconds to indicate that the doors, and trunk
lid cannot be locked.
Key Left-In-Trunk Compartment Warning Beep
— If Equipped With Advanced Keyless Function
If the key fob is left in the trunk with all doors
locked and the trunk lid closed, a beep
sound is heard for about 10 seconds to
remind the driver the key fob has been left in
the trunk.
If this happens, open the trunk lid by
pushing the electric trunk lid opener and
remove the key fob.
A key fob removed from the trunk may not
function because its functions may have
been temporarily suspended. To restore the
key fob function, perform the applicable
procedure. See paragraph “Keys” in “Getting
To Know Your Vehicle” chapter.
Key Left-In-Vehicle Warning Beep
(with the advanced keyless function)
If a key fob is left in the vehicle and all the
doors and the trunk are locked using a sepa
-
rate key fob, a beep sound is heard for about
10 seconds to remind the driver that the key
fob has been left in the vehicle.
If this happens, open the door and remove
the key fob. A key fob removed from the
vehicle this way may not function because its
functions may have been temporarily
suspended.
Perform the applicable procedure to restore
the functions of the key fob. See paragraph
“Keys” in “Getting To Know Your Vehicle”
chapter.
Vehicle Speed Alarm — If Equipped
The vehicle speed alarm function is designed
to alarm the driver via a single beep sound
and a warning indication in the instrument
cluster that the previously set vehicle speed
has been exceeded.
You can change the vehicle speed setting at
which the warning is triggered. See para
-
graph “Trip Computer” in “Getting To Know
Your Vehicle” chapter.
Tire Inflation Pressure Warning Beep — If
Equipped
Vehicle With Conventional Tires
: the warning
beep sound will be heard for about three
seconds when there is any abnormality in tire
inflation pressures. See “TPMS” in “Safety”
chapter.
Vehicle With Run-Flat Tires
(If Equipped): the
warning beep sound will be heard for about
three seconds if the tire pressures decrease.
If the tire pressure decreases extremely, a
beep sound will be heard for approximately
30 seconds. See “TPMS” in “Safety”
chapter.
Blind Spot Monitoring (BSM) System Warning
Beep — If Equipped
Driving Forward
: the warning beep operates
when the direction indicator lever is operated
to the side where the Blind Spot Monitoring
(BSM) warning light is illuminated.
