19
La operación de este equipo está sujeta a las
siguientes dos condiciones:
1. es posible que este equipo o dispositivo
no cause interferencia perjudicial y
2. este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la
que pueda causar su operación no
deseada.
NOTE:
Changes or modifications not expressly
approved by the party responsible for compli
-
ance could void the user’s authority to
operate the equipment.
IGNITION SWITCH
Push Button Start Positions
The system operates only when the key fob is
within operational range.
When the clutch pedal (manual transmission)
or brake pedal (automatic transmission) are
not depressed and the keyless ignition
START/STOP ignition button is pushed, the
ignition cycles in the order of OFF, ACC, and
ON. Pushing the START/STOP ignition button
again from ON/RUN position, places the igni
-
tion in the OFF position.
Keyless START/STOP Ignition Button
NOTE:
The engine starts by pushing the START/
STOP ignition button while depressing the
clutch pedal (manual transmission) or the
brake pedal (automatic transmission). To
change the ignition position, push the
START/STOP ignition button without
depressing the clutch or brake pedal.
Do not leave the ignition in the ON posi
-
tion while the engine is not running. The
battery could discharge. If the ignition is
left in the ACC position (for automatic
transmission, the gear selector is in the
PARK position, and the ignition is in ACC),
the ignition cycles to the OFF position
automatically after about 25
minutes.
OFF
The power supply to electrical devices turns
off, and the keyless ignition start indicator
light (amber) also turns off. In the OFF posi
-
tion, the steering wheel is locked.
ACC (Accessory)
Some electrical accessories will operate and
the indicator light (amber) illuminates. In
the ACC position, the steering wheel is
unlocked.
The Keyless Entry System does not function
while the keyless ignition has been placed in
the ACC position, and the doors will not lock/
unlock even if they have been locked manu
-
ally.
ON
This is the normal running position after the
engine is started.
NOTE:
The indicator light (amber) turns off (the
indicator light [amber] illuminates when the
ignition has been placed in the ON position
and the engine is not running).
Some indicator lights/warning lights should
be inspected before the engine is started.
