201
5. Turn the cover counterclockwise and
remove it, disconnect the connector from
the unit by pressing the tab on the
connector with your finger and pulling
the connector.
6. Turn the socket and bulb assembly coun
-
terclockwise and remove it.
7. Disconnect the bulb from the socket.
8. Install the new bulb in the reverse order
of the removal procedure.
Head Lamp Assembly
Head Lamp Assembly
Abarth Mud Guard
Mud Guard
Front Direction Indicator Lights
Proceed as follows:
1. If you are changing the right bulb, start
the engine, turn the steering wheel all
the way to the right, and turn off engine.
If you are changing the left bulb, turn the
steering wheel to the left.
2. Make sure the ignition is placed in the
OFF mode, and the headlight switch is
off.
3. Remove the fasteners in the five loca
-
tions and partially peel back the mud
guard.
1 — High Beam Lamp
2 — Position Lamp
3 — Daytime Running Lamp
1 — High Beam Lamp
2 — Position Lamp
3 — Daytime Running Lamp