FFEI alinte4page, Руководство по установке

Страница: 66 / 162

4-10 I
NSTALLING ALINTE
4
PAGE
E
QUIPMENT AND
S
OFTWARE
Remove the following transit fixings:
A
)
Traverse carriage - see “Traverse Carriage Transit Fixing” on
page 4-10
B
)
Platen - see “Platen Transit Fixings (Entry Level Only)” on
page 4-12 .
C
)
MMI console cover.
4.3.1.1 Traverse Carriage Transit Fixing
See Figure 4.9 on page 4-11 .
1.
Locate the packaged ball cage assembly from its transit position
taped to the top of the optics assembly (after the top cover is
removed).
CAUTION: The ball cage is very delicate and easily damaged. Take care
when unpacking this assembly.
2.
Check that the ball cage is clean and undamaged. Lay the cage on a
flat surface and check that it is straight; if it is deformed then adjust it
before fitting.
3.
Clean the V-groove with a lint-free cloth and solvent (for example,
IPA).
4.
From the user side: Insert the ball cage on the V-groove and slide it
under the carriage, shown in
Figure 4.10 on page 4-12 , noting the
orientation. Push it towards the service end until it is up against the
service end stop.
If it is difficult to slide the ball cage between the V-grooves under the
carriage then slacken the transit screws slightly.