5-12
C
OMMISSIONING
THE
ALINTE
4
PAGE
S
YSTEM
5.3.2 Calculating Values for 96 Resolution Test
Strips
Figure 5.6 96 resolution test strips
NOTE:
Figure 5.6 on page 5-12
shows the Focus 96V and Focus
96H test strips. Each set consists of 13 strips 8 mm wide. The
focus setting for each strip is shown here for illustrative pur-
poses only and will not appear on the exposed plate.
1.
For the Focus 96V set of strips, measure the density at the
top
of
each strip to find the strip with the lowest density.
Select the focus setting for the lowest density test strip.
NOTE: The start value is -900 and the step value is 50 in this
example.
2.
Measure the density
mid-point
down each of the thirteen strips to
find the strip with the lowest density.
Select the focus setting for the lowest density strip.
3.
Measure the density at the
bottom
of each strip to find the strip with
the lowest density
Select the focus setting for the lightest strip.
The three recorded values should all be within
150
of each other.
TOP
MID-POINT
BOTTOM
FOCUS 96H
FOCUS 96V
Содержание alinte4page
