Festo SBO***-Q Series, Руководство пользователя

Страница: 93 / 256

4. Commissioning
4-31
Festo P.BE-SBO-Q-EN en 1602e
Signal sequence with standard settings
The signal sequence with standard settings of the system
parameters in the “Free run” evaluation mode could appear
as follows.
I0
O0
Cycle duration Cycle duration Cycle duration
Outputs
write Outputs
write Outputs
write
Img.3 Output Img.2 Output Img.1 Output
Permanent trigger
Img.1 Image evaluation
medium Img.3 Image
evaluation short Img.2 Image evaluation
long
Trig. ignored,
wait O0=1
Output invalid
Internal outputs O1, O2, LED D
Power
Fig. 4/8: “Free run” evaluation mode – Signal sequence with standard settings
Settings of the system parameters (standard values):
– Earliest start of output after cycle start = 0 ms
– Ignore trigger signal after ready for operation = 0 ms
– Start of image evaluation after cycle start = 0 ms
– Function at O2 = reject part
– Start of lighting = automatic
– Duration of lighting = automatic
– Reset outputs at outputs after “Ignore triggering signal”
= Off
– Reset outputs at outputs during Analysis = No