Festo SBO***-Q Series, Руководство пользователя, Страница: 54 / 256

3. Installation
3-8
Festo P.BE-SBO-Q-EN en 1602e
M12 plug
1)
Pin Signal
Description Core colour
2)
1
8
6
5
7
2
4
3
1 I0 Rising edge
3)4)
: Trigger signal White (WH)
2 24 V DC +24 V DC (tolerance: ± 10 %) Brown (BN)
3 Reserved Do not connect Green (GN)
4 O1 Logic 1:
Last evaluation indicated Good part
4)
Yellow (YE)
5 I1 Rising edge
3) 4)
:
Apply Inputs signal
Acknowledge Error signal in case of
error
Grey (GY)
6 O0 – Logic 1:
Device ready for operation (Ready)
4)
– Logic 0:
Device not yet ready for operation
(e.g. evaluation running, system
fault)
4)
Pink (PK)
7 0 V 0 V Blue (BU)
8 O2 Logic 1: Last evaluation indicated
Reject part
4)
Red (RD)
Metal covering
5)
Screening (shield)
1)
Tighten union nut by hand
2)
Core colours of the original cable SIM-M12-8GD-...-PU
3)
The signal levels/edges can be configured via system parameters; the specified description
corresponds to the standard configuration.
4)
The function can be configured via system parameters; the specified description corresponds to
the standard configuration.
5)
Connect cable screening with low impedance to earth potential (
è
Fig. 3/2)
Tab. 3/3: Operating voltage connection and I/Os at the 8-pin M12 plug “24 V DC”
The function and functional behaviour of the I/Os can be con­
figured in CheckKon via system parameters. The functional
behaviour of the I/Os in the different evaluation modes must
be differentiated (
è
chapter 4.9 ff.).