Festo SBO***-Q Series, Руководство пользователя

Страница: 136 / 256

4. Commissioning
4-74
Festo P.BE-SBO-Q-EN en 1602e
If the data output exists and uses the Telnet protocol, you will
receive
the result in accordance with the output format:
– Telnet – SBO…-Q Part Detector: binary coded
– Telnet – SBO…-Q Data Collection: binary coded
– Telnet – XML: output in the following form:
<Name of data output>
<float32_1>RESULT VALUE_1</float32_1>
<float32_2>RESULT VALUE_2</float32_2>
:
<string_1>RESULT VALUE_N</string_1>
:
</Name of data output>
IMAGE Image evaluation
The IMAGE command is only allowed in the “Triggered” and
“Free run” evaluation modes. The command performs a com­
plete evaluation. The inspection results and features are
thereby entered in the corresponding flagword and string
addresses.
CHANGEPRG Change check program
This command allows the check program to be changed. The
values 1 to 256 are permitted as check program numbers.
Requirements:
– The system parameter “Check program preselection” is
configured to “I/O possibilities”. Otherwise, you will
receive an error message.
– The device is ready for operation:
Output “Ready for Operation” = logic 1.
EXIT Terminate connection
The Compact Vision System closes the Telnet connection.
VERSION Inquiry of the version of the Telnet server and the version of
the device.