Festo SBO***-Q Series, Руководство пользователя

Страница: 53 / 256

3. Installation
3-7
Festo P.BE-SBO-Q-EN en 1602e
Note
Use only one of the following original cables from Festo
for connecting the operating voltage supply and the
inputs/outputs.
The following table shows the original cables which should
be used for connecting the operating voltage supply and
the I/Os:
Type
1)
Designation Description
SIM-M12-8GD-2-PU
SIM-M12-8GD-5-PU Plug socket with cable
Plug socket with cable 2 m long
5 m long
1)
Cable for operating voltage supply, straight socket, M12x1, 8-pin,
wire ends zinc-coated
Tab. 3/2: Cable for operating voltage supply and
digital I/Os
The operating voltage is supplied together with the
input/output circuit via the 8-pin M12 plug marked “24 V DC”
(
è
Tab. 3/3).
The following components are supplied with +24 V DC via this
connection:
– the internal electronics of the Compact Vision System
– the load current of activated outputs.
The maximum permitted current at the supply is 2 A.
Caution
Correct earthing is important for faultless operation.
Connect the screening of the cable (SIM-M12-8GD) with
low impedance to earth potential.