Festo SBO***-Q Series, Руководство пользователя

Страница: 155 / 256

4. Commissioning
4-93
Festo P.BE-SBO-Q-EN en 1602e
The characteristics of the various slaves are usually admin­
istered in a list or library e.g. EDS library (EDS = electronic
data sheets).
The following possibilities are available for extending an EDS
library:
– Installing EDS files
The EDS file serves simply to identify the Compact Vision
System in the network.
– Enter slave features manually
Installation of the EDS file is not a prerequisite for placing
the device in operation. As an alternative, a generic device
with suitable characteristic settings can also be created
(
è
section “Entering slave properties manually”).
The use of EDS files is not supported by RSLogix Version 17,
but is planned for version 18.
Reference source Current EDS files, icon files and information on the EDS files
can be found at the following Internet address:
www.festo.com/fieldbus
Installing EDS files
The following files are required for the Compact Vision System:
– SBOx­Q.eds
– SBOx­Q.ico (Icon file for representation in the configuration
program)
Installing EDS files Install the files as per the RSLogix 5000 documentation.
Symbol files Depending on the configuration program used, you can assign
a symbol file (.ico format) to the
Compact Vision System.
The device is then displayed accordingly in the configuration
program.
Notes on installing the EDS files and the icon files can be
found in the documentation for your controller.