Feig Electronic OBID ID ISC.LR1002, Руководство пользователя

Страница: 162 / 173

OBID i-scan
®
HF System-Manual ID ISC.LR1002
FEIG ELECTRONIC GmbH Page 162 of 173 H20411-0e-ID-B.docx
ANNEX D: Index of Status Bytes
Hex-value General
0x00 OK:
•
Data / parameters have been read or stored without error
•
Control command has been executed
Hex-value Transponder Status
0x01 No Transponder:
•
No Transponder is located within the detection range of the Reader.
•
The Transponder in the detection range has been switched to mute.
•
The communication between Reader and Transponder has been interfered and
the Reader is not able to read the Transponder anymore.
0x02 Data False:
•
CRC16 data error at received data.
0x03 Write-Error:
Negative plausibility check of the written data:
•
Attempt to write on a read-only storing-area.
•
Too much distance between Transponder and Reader antenna.
•
Attempt to write in a noise area.
0x04 Address-Error:
The required data are outside of the logical or physical Transponder-address area:
•
The address is beyond the max. address space of the Transponder.
•
The address is beyond the configured address space of the Transponder.
0x05 Wrong Transponder-type:
This command is not applicable at the Transponder:
•
Attempt to write on or read from a Transponder.
•
A special command is not applicable to the Transponder.