18
2 Basic safety instructions
2.5 Responsibility of the owner
The remote control is used in the commercial sector. The owner of the
product is therefore subject to the legal duties of health and safety at
work.
In addition to the notes on health and safety at work contained in these
operating instructions, adherence to the safety, accident prevention and
environmental protection regulations applicable to the product's area of
application is required.
The following particularly applies:
The owner must obtain information on the applicable health and
safety at work regulations and must determine additional hazards
arising due to the special working conditions at the product's operating
location in a hazard assessment. These must be implemented in the
form of operating instructions for the operation of the product.
These operating instructions must be stored in the immediate vicinity
of the product and must be accessible to the persons working on and
with the product at all times.
The owner must clearly define the responsibilities of the operating
personnel.
The owner must ensure that the operating personnel understands the
content of the operating instructions in full.
The information provided in the operating instructions must be
observed completely and unreservedly!
The owner must ensure that all maintenance, inspection and
installation work is carried out by qualified specialist personnel which
has been provided with adequate information by studying the
operating instructions in detail.
The owner informs the manufacturer or its authorised dealers if safety
defects occur on the product or during its use.
Содержание Dynapac SCREED-CONTROL
Страница 2: ...www dynapac com ...
Страница 62: ...62 8 Operation in general The new sensor is ready to operate 6 2 4 0 2 4 0 2 4 0 ...
Страница 166: ...www dynapac com ...