Fast BW750, Руководство по эксплуатации

Страница: 65 / 84

65
7. Drive at normal speed, turn complete boom on and
spray as normal until product tank is empty.
8. Repeat the cleaning procedure two more times to
ensure proper cleaning.
1- Valve B
9.29 Electric Control Rinse System
9.29.1 Short Term Shutdown
Rinsing the Product Pump, Controls and Boom Lines
Leaving the Product Tank Undisturbed:
1. Turn OFF the “Agitation Valve” located on the front
control stand - If so desired.
2. Turn OFF the Self Cleaning Filter valve located at the
front left corner of the operator platform - If so desired.
1 - Agitation Valve
2 - Self Cleaning Filter Valve
3. Locate the electric rinse control switch on the control
box on the tractor. Move the switch to “Rinse Water” or
“Rinse Tank” (depending on which control switch your
sprayer has).
4. Start product pump, drive at normal speed, turn
complete boom ON and spray as normal until clean
liquid comes out of sprayer tips.
5. Turn boom OFF, stop the product pump and stop the
tractor.
6. Move the electric rinse switch on the tractor control box
to the “Product Tank” position.
7. Turn ON the “Agitation Valve” located on the front
control stand - If so desired.
8. Turn ON the Self Cleaning Filter valve located at the
front left corner of the operator platform.
9.29.2 Long Term Shutdown
Rinsing the Product Pump, Product Tank, Controls and
Boom Lines:
NOTE: It is important to “Triple” rinse the system to insure
proper cleaning. The use of a Neutralizer is recommended
for cleaning when changing chemicals.
Parts are available from your Fast Manufacturing, Inc.
1. Add the recommended amount of Neutralizer to the
clean water rinse tank.
2. Locate the electric rinse control switch on the control
box on the tractor. Move the switch to “Rinse Water” or
“Rinse Tank” (depending on which control switch your
sprayer has).
3. Start the product pump and run at full speed.