Fast BW750, Руководство по эксплуатации

Страница: 33 / 84

33
9. Operation
Read and understand Operator’s Manual and all safety
signs before using.
^
Lower machine to the ground, place all controls in
neutral, stop engine, set park brake, remove ignition key,
and wait for all moving parts to stop before servicing,
adjusting, repairing or unplugging.
^
Install and secure all guards and shields before starting
or operating.
^
Keep hands, feet, hair and clothing away from all
moving and/or rotating parts.
^
Do not allow riders on the sprayer or tractor during
operation or transporting.
^
Clear area of all bystanders, especially children, before
starting or filling with chemical or fertilizer.
^
Read chemical or fertilizer manufacturers warnings,
instructions and procedures before starting and follow them
exactly.
^
Do not breathe, touch or ingest chemicals or fertilizer.
Always wear protective clothing and follow safe handling
procedures.
^
Stay away from wings when folding or extending
wings. Keep others away.
^
Clean reflectors, SMV and lights before transporting.
^
Attach securely to towing unit using a hardened pin
with a retainer and a safety chain.
^
Do not exceed a safe travel speed.
^
Use hazard flasher on tractor when transporting.
^
Stay away from overhead power lines when folding or
extending the wings and during transport.
^
Before applying pressure to the hydraulic system,
make sure all components are tight, hoses and couplings
are in good condition.
^
Review safety instructions before operating machine.
9.1 New Operator Or Owner
The Fast Manufacturing, Inc. Sprayer is designed to meter
out and distribute liquid chemical or fertilizer and place it
where required.
It is the responsibility of the owner or operator to read this
manual and to train all other operators before they start
working with the machine. Follow all safety instructions
exactly. Safety is everyone’s business. By following
recommended procedures, a safe working environment is
provided for the operator, bystanders and the area around
the worksite. Untrained operators are not qualified to operate
the machine.
Many features incorporated into this machine are the result
of suggestions made by customers like you. Read this
manual carefully to learn how to operate the machine safely
and how to set it to provide maximum field efficiency. By
following the operating instructions in conjunction with a
good maintenance program, your sprayer will provide many
years of trouble-free service.
9.2 Break-In
Perform the following steps on a new sprayer:
A. After 1 hour of operation:
1. Tighten all wheel lugs to 135 lb/ft of torque.
2. Tighten all other fasteners and hardware to required
torque.
3. Check that no chemical or hydraulic lines are being
pinched or crimped. Re-route as required.
4. Check that all nozzles and placement components
are clean and working properly. Clean as required.
5. Check that the pump is functioning properly. Adjust
as required.
6. Lubricate all grease fittings.
B. After 5 hours of operation:
1. Tighten all wheel lugs to 135 lb/ft of torque.
C. After 10 hours of operation:
1. Tighten all fasteners and hardware to required
torque.
2. Check chemical and hydraulic line routing.
3. Check that all placement components are clean
and working properly.