15
GROWSPAN
™
ESTATE ELITE ATTACHED GREENHOUSES
Revision date: 01.01.16
FRAME ASSEMBLY (CONTINUED)
NOTE:
If you are unable to seat the gutter rail
completely into the end wall frame as shown, loosen
the angle bracket bolts. This will allow the frame
components to move when the rail is seated in position.
5. After seating the gutter rail in position, retighten the
angle bracket bolts (if needed) and
slide
the bolt shown
in the next photo into position and tighten.
Angle Bracket Bolts
To attach a strut, detach the horizontal brace of the
end wall frame
if needed. After the strut and bolt are
secured, reattach the end wall horizontal brace.
Gutter Rail
Strut (33)
Gutter Rail
Horizontal
Brace
6. With assistance, place a bolt into the end wall
upper
support bolt track
and
slide it down
to the gutter rail of
the sidewall.
Photo shows sliding the bolt into the track at the
peak of the end wall frame
where the upper support
connects to the top bracket.
7. With the bolt in place, add a nut and tighten all bolts in
the location shown below.
8. Move to the lower corner of the two assembled frame
sections (the end and sidewall). See photo below.
End Frame
Base Rail (10)
Sidewall Base Rail
Photo above shows the end frame to sidewall as seen
from the inside
of the greenhouse frame assembly.
Peak
Slide bolt into
end wall support
track.
Gutter Rail
Use bolt with
a red head.
