FarmTek Growers Supply GrowSpan 500 Series, Инструкция по эксплуатации

Страница: 15 / 146

15
Revision date: 12.02.16
Rafter Assembly
RAFTER ASSEMBLY
After setting the ground posts/base plates, continue with the rafter assembly. Do not set assembled rafters into position
on the ground posts until concrete has set (if applicable). Check with contractor for set times.
NOTE: All rafter assemblies consist of three main rafter sections. Consult the rafter diagrams in the technical
documents at the end of these instructions before and during the rafter assembly process for details. Assistance is
required to assemble the rafters and frame. Assemble all main sections of rafters as described below and set aside.
STEP 1: Select
the rafter pipes
to assemble one
rafter.
STEP 3: Secure
each rafter joint
using two (2)
FA4482B Tek
screws.
STEP 2: Slide
the separate pipe
pieces together.
STEP 4: Wrap
each splice and
Tek screws with
duct tape or
stucco tape to
protect the cover.
PG500TC23G16S03
PG500TC2316S301 PG500TC2316S302
PG500TC23G16S03
30' Wide Rafter
Align pre-drilled
holes at peak.