![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-f1-set/csl-elite-f1-set_manual_3338010039.webp)
39
7.3.9 BRF (brake force)
BRF range: OFF 010 … 100
BRF default: 050
This brake force modifiers give you the ability to adjust the brake feeling ac
-
cording to your favour: Increasing the BRF to 100 means the user needs to
press the brake with minimum force to achieve 100% brake signal. Reducing
the BRF to OFF means the user needs to press the brake only with maximum
force to achieve 100% brake signal.
You can either check the brake signal level on the PC* driver or you can see it
on the RevLEDs of the CSL Elite F1® Set and/or the attached steering wheel
(depending on steering wheel type). To change the active value, move the di
-
rectional stick of the Fanatec
®
steering wheel up or down.
NOTE
:
The BRF parameter is only available when a supported pedal
set is connected to the PEDAL port of the CSL Elite F1® Set. Please read
the description and/or manuals of your pedals to verify if the BRF feature
is supported. For reference, the CSL Elite Pedals LC (i.e. CSL Elite Pedals
with Loadcell Kit) support this feature.
7.4 Revolution Lights (RevLEDs)
The CSL Elite F1® Set offers the RevLEDs feature integrated directly into the
wheel base. This RevLEDs are usually mirrored with the RevLEDs of the steer
-
ing wheel. Games supporting the steering wheel
RevLEDs by default will also support the wheel
base RevLEDs.
Further, if games make use of it, the RevLEDs of the wheel base can indicate
a different function than the Steering Wheel RevLEDs. Example: Wheel Base
RevLEDs show the fuel level while the steering wheel RevLEDs indicate engine
RPM and help the driver shift up at the best moment.
Beyond this in-game feature, the RevLEDs are also a helpful indicator in case
of any unexpected behaviour: While the wheel calibration runs after power ON
is proceeding, the RevLEDs of the wheel base show the current status. For
example, if no steering wheel is attached or is attached but cannot be detected
and identified, the three blue RevLEDs will not be lit.
After calibration run is completed the RevLEDs turn off automatically and the
game or software takes control.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.