15
6.3 Hard-mounting the CSL Elite Wheel Base +
The CSL Elite Wheel Base + offers a three-point hard-mount location on the
bottom side of the CSL Elite Wheel Base + (see the right-hand side picture
below.) To hard-mount the wheel base, first disassemble the two blocks from
the bottom side with a 3mm Allen key (not included), see highlighted on the left
hand picture below:
IMPORTANT:
Use only good quality M6 bolts. Choose the bolt length
so that the thread does not reach more than 16 mm into the wheel base.
Example: If your table thickness is 20 mm the bolt must not exceed a to
-
tal thread length of 36 mm! Always use all three hard-mount points, this
allows a proper and stable installation and avoids damage!
Table
max 16mm
X
To hard-mount the CSL Elite Wheel Base + to a table or rig with bolts please
find the printable drilling template in the download area of our website
www.fanatec.com.
