43
To
enter
shifter
calibration
mode,
simultaneously press the Tuning Menu button
+
, highlighted on the right-hand side.
For the detailed process read the shifter
manual.
8.1.5 Shifter calibration mode
To enter the H-pattern shifter calibration
mode press buttons
+
of the CSL Elite
Steering Wheel (PS4
TM
version) at the same
time while H-pattern shifter is connected, see
picture on the right-hand side:
Please refer to the quick guides of your Fanatec
®
steering wheel for more
detailed information.
NOTE
:
After a firmware update the CSL Elite F1® Set will request the
shifter calibration automatically as soon as a non-calibrated H-pattern
shifter is connected and detected. The menu will guide you through the
calibration steps as described below.
Put the H-pattern shifter lever into the position shown on the LED display and
acknowledge each single position by pressing
/
START (10)
to get to the
next one.
