![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-f1-set/csl-elite-f1-set_manual_3338010028.webp)
28
Indicator bar shows the current steering wheel
position, the upper box shows the position in
digits, the lower box shows the position as an
angle (positive and negative angle related to
the calibrated wheel center position).
The “
Display test
” button activates a signal flow on the LED display of the at
-
tached Fanatec
®
steering wheel and activates all LED display segments so you
can check if all LED display segments work properly.
The “
FFB test
” button starts a force feedback test and activates the motor of
the CSL Elite F1® Set to check proper functionality.
The “
Wheel Base RevLEDs test
” button starts a signal flow on the LED bar
on the upper front side of the CSL Elite Wheel Base and activates them to test
proper functionality of each single LED.
The “
Steering Wheel RevLEDs test
” button starts a signal flow on the LED bar
on the steering wheel top side and activates them to test proper functionality
of each single LED. This is only available for steering wheels which have Rev
-
LEDs, refer to the product description of the used steering wheel.
The “
Vibration test
” button starts a vibration signal to activate the vibration
motors inside supported Fanatec
®
steering wheels, such as the included
ClubSport Steering Wheel F1
®
Esports
The “
Clutch
”, “
Brake
”, and “
Throttle
” indicators show the
current activation and position of these single pedals by a
blue bar moving up and down. Therefore the pedals must be
connected to the CSL Elite F1® Set.
Note:
Every pedal lever must be pressed down completely to
auto-calibrate the lever movement distance each time when
power resumes.
The “
D-pad
” arrows (up, down, left, right) change their col
-
our from black to blue when the corresponding direction is
pressed on the attached Fanatec
®
steering wheel.
The “
Rotary Encoder
” boxes flash blue when turning the
FunkySwitch
TM
left or right.