![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-f1-set/csl-elite-f1-set_manual_3338010029.webp)
29
The “
2GS
” indicator shows the activation of the 2GS (two
gears shifter, sequential shifter, SQ) with a blue square,
depending on the activated shifting position (up or down).
This can be for example the ClubSport Static Shifter Paddles
or the ClubSport Shifter SQ in sequential mode if these are
not mapped to the steering wheel shifter paddles.
The “
H-pattern
” indicator shows the activation of the 6GS,
7GS or 8GS (six gears shifter, seven gears shifter or eight
gears shifter) with a blue square, depending on the activated
shifting position. This can be for example the ClubSport
Shifter or ClubSport Shifter SQ. Therefore, the H-pattern
shifter must be calibrated. See chapter ‘Hotkeys’ ‘Shifter
calibration mode’ for more details
The “
Analogue Stick
” on the left side of the ClubSport Steer
-
ing Wheel F1
®
Esports has a x-axle and y-axle which are
shown by the two bars on the left-hand side. The Analogue
Stick can be used as a mouse on the PC.
The biggest area in this window is the upper right section, showing a scheme
of the attached Fanatec
®
steering wheel with all buttons. If you press one of the
buttons on the attached steering wheel the corresponding button will be high
-
lighted with a blue spot as long as the button is physically activated. Please note
that this view changes depending on the attached Fanatec
®
steering wheel.
See example picture for the ClubSport Steering Wheel F1
®
Esports below: