31
If you go to the PC* driver page ‘Update’ you will see this window:
In this window you can see the following informations:
•
Currently installed and used PC* driver version
•
Quick link to the Fanatec
®
homepage www.fanatec.com
Below the shown information there is the button “
Update CSL E WB (PS4
TM
Version) Firmware
”. When pressing this button the firmware update process
for the CSL Elite F1® Set will start (see more detailed description in chapter
“Firmware update procedure” below in this user manual).
7.1.2 Firmware update procedure
To initiate the firmware update the CSL Elite F1® Set first has to be connected
to the PC* by USB cable and then it has to be switched to Bootloader mode.
You can switch to Bootloader mode in two different ways:
•
by PC* driver, on page ‘Update’ press the button
Update CSL E WB
(PS4
TM
Version) Firmware
when the CSL Elite F1® Set is switched ON,
see previous chapter ‘PC* driver’
•
by pressing the ON/OFF button “ ” on the front plate of the CSL Elite
F1® Set for about 8 seconds when the CSL Elite F1® Set is switched OFF.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.
