![background image](http://html1.mh-extra.com/html/fanatec/csl-elite-f1-set/csl-elite-f1-set_manual_3338010024.webp)
24
6.10.1 USB
The USB port is used to connect the CSL Elite Wheel Base + to PlayStation
®
4
or other platforms*.
IMPORTANT:
Use only the USB cable with the straight plug which is
packaged with your CSL Elite F1® Set to avoid damage to the CSL Elite
F1® Set or PlayStation
®
4 electronics!
6.10.2 SHIFTER1
The SHIFTER1 port is used to connect H-pattern shifters to the CSL Elite
F1® Set (e.g. the ClubSport Shifter or the ClubSport Shifter SQ in H-pattern
mode.) Sequential shifters can also be connected to this port. Note: Sequential
shifters connected to this port can be mapped identically to the shifter paddles
at the CSL Elite Steering Wheel (PS4
TM
version) or any other Fanatec
®
steering
wheels by PC* driver settings (see chapter ‘PC* driver’ of this user manual).
6.10.3 SHIFTER2
The SHIFTER2 port is used to connect sequential shifters to the CSL Elite F1®
Set (e.g. the ClubSport Shifter SQ in SQ mode or the ClubSport Static Shifter
Paddles.) Note: Sequential shifters connected to this port can be mapped
identically to the shifter paddles at the CSL Elite Steering Wheel (PS4
TM
version)
or any other Fanatec
®
steering wheels by PC* driver settings (see chapter ‘PC*
driver’ of this user manual).
Attention: H-pattern shifters will not work on SHIFTER2 port!
6.10.4 PEDAL
The PEDAL port is used to connect the CSL Elite Pedals or other Fanatec ped
-
als to the CSL Elite F1® Set. (e.g. CSL Elite Pedals LC or ClubSport Pedals
V3).
6.10.5 HANDBRAKE
The HANDBRAKE port is used to connect an analogue handbrake device to
the CSL Elite F1® Set.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.