30
If you go to the PC* driver
Settings
page, you will see this window:
The “
Wheel angle / sensitivity
” bar can adjust the maximum turning angle of
the CSL Elite F1® Set, so the functionality is identical with the option ‘SEN’ in
Tuning Menu (see chapter ‘Tuning Menu’ of this manual for more detailed infor
-
mation). Note that in Tuning Menu the value for ‘SEN’ must be set to ‘OFF/Aut’
to allow the PC* driver to take the control. If in Tuning Menu ‘SEN’ is set to any
other value than ‘OFF/Aut’ the value set in Tuning Menu is applied and valid
and the PC* driver has no influence.
In the “
Pedals
” section there is only the one checkbox called ‘Combined ped
-
als’. Activate this checkbox if the game or software uses only one input (I/O) for
brake and throttle pedal signals (negative signal for brake, positive signal for
throttle). This might solve problems especially with older games.
In the “
Gear shifts
” section there is only one checkbox called ‘Map sequen
-
tial shifter to the shifter paddles’. Usually shifters connected to the SHIFTER2
port are mapped to different inputs (I/Os) than the shifter paddles on Fanatec
®
steering wheels. If you want to change the mapping so that the inputs for these
shifters are mapped identically to the Fanatec
®
steering wheel shifter paddles,
activate this checkbox.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.